Exterior painting
Power wash to remove dirt and debris.
Protect brick, concrete, and landscaping as needed
Scrape and remove loose and peeling paint
Lightly sand rough spots on wood trim
Prime bare spots
Tighten loose boards as needed
Re-seat loose nails
Caulk gaps and cracks and holes as needed
Apply one to two coats of high quality exterior latex paint
Clean up the job site and haul away all debris

Interior painting
Protect flooring, fixtures, and furnishings
Remove outlet covers and light switch covers before painting, and re-install after painting
Fill cracks and holes in surfaces to be painted with spackling or caulk as needed
Patch damaged drywall and spot texture as needed
Prime over stains
Tape and caulk the edges as appropriate
Apply one to two coats of high quality interior latex paint
Clean up job site and haul away all debris

Drywall repair and installation
Repair water damage
Small holes or cracks

Drywall texturing
Spot match current texture
Slick, orange peel, knock down, and stomp texture

Wallpaper removal
One wall to a complete house
Prime over any remaining wallpaper glue with an oil base primer/sealer
Patch and texture afterwards as required

Fence and deck staining
Protect your house, lawn and concrete
Wash, clean, strip and/or sand as needed depending on the condition of the wood
Apply a coat of high quality semi-transparent or semi-solid latex or oil base stain

Interior wood staining and sealing
Fill holes and seams in the wood
Stain the wood
Apply two coats of clear sealer, sanding between coats